3. Monthly charges apply for MessageBank®. Message retrieval is free from Telstra fixed phones anywhere
in Australia. Retrieval charges apply from mobiles, payphones and for calls using a Telstra Telecard™.
6 7
Storing numbers and names in Memory
You can store up to 20 numbers and names in Memory:
1. Press
then
or
“ENTER NUMBER” on the display indicates an empty
memory location.
2. Enter the phone number, including the area code.
3. Press
to save number only, or press
to enter a name using letters on keypad
(maximum of 13 letters including spaces).
4. Press
to save number and name in Memory.
5. Press
to return to standby mode or press
or
to locate an empty memory
location to store another name and number.
Hints:
If you make a mistake while entering a name or number, press
to delete the previous
letter or number.
OR
Press
to enter a 1.5 second pause between numbers if needed.
The cursor shifts one space to the right automatically or press
to move the cursor right.
Space can be entered by pressing
Copying a number from the Callers List to Memory
1. Press
then
or
to find an empty memory.
2. Press
then
or
to select number.
3. Press
to enter name using letters on keypad and press
to save.
4. Press
to return to standby mode or press
or
to locate an empty memory
location to store another name and number.
Deleting numbers and names from the Callers List or Memory
Press
, press
or
to select entry and then press
to delete entry.
Dialling from Memory
Press
press
or
to select number and then lift the handset to call.
USING MESSAGEBANK® BUTTON
If you are a Telstra Home Messages 101® and MessageBank®
1
user, it’s now even easier
to retrieve your messages. Your T1000C is programmed to access Telstra Home Messages
101® and MessageBank®.
To retrieve a message from your message service
3
press
and follow the message service prompts.
You can store your PIN under the MessageBank® Button
Press
Note: Your PIN is not required for Telstra Home Messages 101®.
Note: Your PIN number will only be visible when entering.
To delete your PIN
Press
To retrieve a message from your message service
1
when you have stored your PIN
press
Wait for password prompt, press
and then follow the
message service prompts.
Note: Display shows “MESSAGEBANK”.
You can change the programmed number to access other messaging services,
e.g. MessageBank® Virtual
3
& MessageBank® Combined
3
.
To change your access number to access other messaging services
Press
Enter the access number, press
then
Visual Message Waiting Indication (VMWI)
The T1000C is designed to provide Visual Message Waiting (a flashing red indicator) when
you connect the T1000C Power Pack. To purchase the T1000C Power Pack and arrange the
connection to the VMWI service, simply call Telstra on 13 2200. When a message is left in
your MessageBank® service, a signal is sent to your telephone and the red indicator will
flash and the word “VOICE MESSAGE” will be displayed. The red indicator will stop flashing
a short time after you have listened to all your messages.
To Next Page
Loading...
