3 STEP BY STEP GUIDE
3.1 EMERGENCY SWITCH SETTING
The Emergency Switch on the back of the handset can be programmed to make a
call and/or send an SMS to friends or relatives simultaneously.
• Press Down (5 times) > OK to enter the Settings Menu
• Press Down (6 times) to get to Switch Setup
• Press OK to select Switch, Move the cursor to On then press OK to enable the
switch.
• Press Back then Down to get to Switch Number:
1. The first location will define the voice call number.
2. Locations 2-5 define the SMS numbers.
• Select an Empty location then press Add to add a new number.
• At this point, if you already have Contacts stored on your SIM card they will
be available under the Phonebook setting, otherwise choose Manual to
manually enter a Name and Number. Enter details for up to 5 Contacts.
• Press Back then go to Switch SMS, then press OK to edit. To send an
automated text message there must be a message in this field.
• Press Back then go to Switch and select On to enable this function.
• When enabled and programmed, pushing the Switch Key will send an SMS
message to numbers 2-5 and initiate a call to the first defined number.
• The Alert tone (Settings > Switch Setup > Volume) will continue after the call
To Next Page
Loading...
