Settings > Network Settings is preset for your carrier and all settings should be
on Automatic. Only change these settings if instructed by your carrier.
4.2 SOUND SETTINGS
Select Settings > Sound > to set the following:
a) Tone Setup
1. Ringtone – set the incoming Ring
2. Alarms / Reminder – set an alternate tone for Alarms
3. Message tone – set your preferred Message (SMS) tone
4. Keypad tone – Enable Spoken key tones, Click or Silent (number keys)
b) Volume – Set the incoming Ring volume
c) Silent – enable Silent mode
d) Alert type
Ring Only Vibrate then Ring
Vibrate Only Silent
Vibrate and Ring (Default)
To Next Page
Loading...
