Need help?Do you have a question about the Teltonika FM6320 and is the answer not in the manual?
Important safety precautions and warnings for device operation and handling.
Detailed safety instructions for operating the FM6320 device safely.
Copyright information and legal notices regarding the use of the document.
Overview of the document's content, including architecture and terms.
Lists all equipment included in the FM6320 device package.
Details the GSM/GPRS, GNSS, Hardware, and Interface features of the device.
Physical specifications of the FM6320 device interfaces and operating environment.
Information on the internal battery, operating time, and disposal instructions.
Detailed electrical characteristics of the FM6320 device, including voltage, current, and input/output parameters.
Specifies the absolute maximum electrical ratings for various parameters.
Step-by-step guide for inserting the SIM card into the FM6320 device.
Instructions for downloading and installing the necessary drivers for the FM6320 device.
Explains the meaning of the Navigate LED indications on the FM6320 device.
Explains the meaning of the Status LED indications on the FM6320 device.
Detailed description of the 2x10 socket pinout and its functions.
Describes the USB interface and its role in firmware updates and configuration.
Information on supported accessories like temperature sensors and iButtons.
Step-by-step guide to update the FM6320 device firmware via USB.
Explains how the FM6320 module acquires and sends data, and its communication modes.
Describes the Normal Mode and Deep Sleep Mode of the FM6320 device.
Details the functionality of the built-in 3-axis accelerometer for motion detection.
Explains the virtual odometer feature for calculating travelled distance.
Describes the 4 editable profiles for different operating modes.
Overview of the device's features.
Lists and describes the four available scenarios for FM6320 device operation.
Explains the Trip feature for monitoring and logging travel segments.
Describes the Geofencing feature for tracking entry/exit of defined areas.
Details the Auto Geofencing feature activated by ignition off.
Explains the iButton list for driver authentication in specific scenarios.
Instructions for starting and connecting the FM6320 Configurator program.
Overview of the FM6320 Configurator's main areas and layout.
Describes the main and additional buttons within the Configurator interface.
Explains the information displayed in the Configurator's information area.
Describes how to load and select profiles, global parameters, and external devices.
Configuration of global parameters common to all profiles.
Configuration settings for external devices like CAN, Analog Inputs, and COM ports.
Menu structure for device settings and configurable parameters.
Configuration of system settings like sleep mode and ignition source.
Configuration settings related to GSM module operations.
Configuration of GPRS parameters, including server domain, port, and protocols.
Configuration of data limits for Home and Roaming, with SMS notifications.
Settings for SMS login, password, and authorized phone numbers for security.
Configuration of the operator list for GPRS connection and profile switching.
Configuration of SMS messages sent upon triggering specific events.
Overview of configurable device features.
Configuration of data acquisition methods like time, distance, speed, and angle.
Configuration of scenarios like Eco Driving, Immobilizer, and Over Speeding.
Configuration of the Trip feature, including start speed and timeouts.
Settings for configuring up to 20 Geofence zones and border crossing events.
Settings for the Auto Geofencing feature based on vehicle stops and radius.
Configuration of the iButton list for driver authentication in Auto Geofencing.
Configuration parameters for CAN interfaces, including enable and baud rate.
Overview of available I/O elements and their configuration.
Lists all permanent I/O elements available on the FM6320 device.
Details on configuring I/O elements for monitoring and event generation.
Describes I/O properties like priority, high/low levels, and averaging constant.
Configuration parameters for the K-Line interface.
Tables of configurable parameter values for system settings.
Global and external device parameter values and their default settings.
How GSM operator codes influence profile switching.
How I/O events trigger profile switching.
An example of configuring profile switching based on DIN1 value change.
An example of configuring profile switching based on DIN1 value change from 1 to 0.
Describes the four ways GPS data is acquired and configured.
Configuration of time-based data acquisition using minimum period.
Configuration of distance-based data acquisition using minimum distance.
Configuration of angle-based data acquisition using minimum angle.
Configuration of speed-based data acquisition using minimum speed.
Explains how data is acquired using input/output elements.
How to configure data acquisition by I/O elements and event generation types.
Examples of different record event generation types for I/O data.
Configuration and functionality of ECO/Green driving scenarios.
Recommendations for mounting the FM6320 device for ECO driving functionality.
Parameters used specifically for the ECO driving/Green driving functionality.
Describes the events generated by ECO driving/Green driving functionality.
Configuration and functionality of the Overspeeding scenario.
Configuration of Immobilizer and Authorized Driving scenarios using iButtons.
Explains the working modes for COM1 and COM2 ports.
Describes the Silent Mode where the device performs no activity.
Describes the FM Log Mode, suitable for debugging.
Configuration for LLS (Liquid Level Sensor) mode.
Configuration for LCD display output.
Configuration for RFID HID mode.
Configuration for RFID MF7 mode.
Configuration settings for Garmin device integration.
Configuration for establishing communication via TCP Link Mode.
Configuration for establishing communication via TCP Link Mode in binary format.
Configuration for NMEA log mode via COM2 ports.
SMS command to retrieve the modem status information.
SMS command to get the current device time and week information.
SMS command to list available GSM operators.
SMS command to get acknowledgment of operators in active profile.
SMS command to get NMEA error debug information.
SMS command to get the last configuration date and time.
SMS command to retrieve current GPS data and time.
SMS command to load a specified profile into RAM Engine.
SMS command to reset the CPU.
SMS command to reset all FLASH profiles to default.
SMS command to retrieve device, modem, and code version information.
SMS command to read digital inputs, outputs, and analog inputs.
SMS command to get device runtime system information.
SMS command to delete all saved records from device memory.
SMS command to read input value by ID.
SMS command to set digital outputs to ON or OFF state with timeouts.
SMS command to read parameter value by ID.
SMS command to set parameter value by ID and new value.
SMS command to initiate data sending to a specified target server.
SMS command to get current GNSS information.
SMS command to check static navigation state.
SMS command to retrieve a list of banned operators.
Command to retrieve a list of possible device crashes.
Command to retrieve information about the bootloader and device state.
Command for odometer debug information.
General description of CAN bus and its automotive applications.
How to configure CAN settings using the Configurator's Manual CAN tab.
A sample CAN message structure and configuration example for fuel consumption.
Description of the AutoCAN function for automatic CAN scanning and configuration.
Steps to start CAN configuration and description of available columns.
How to start CAN bus monitoring and use monitoring filters.
How to configure CAN data sending when the device is not connected.
List of AutoCAN IDs for various vehicle data parameters.
Format for configuring AutoCAN parameters via SMS commands.
List of Element IDs for AutoCAN configuration.
Instructions for connecting the FM6320 to a tachograph device.
List of supported Garmin FMI protocols and their benefits.
Details standard protocols like Text Message and Stop protocols.
Details enhanced protocols like Canned Responses and Status Protocol.
Lists supported features on the Tavl client application for Garmin FMI.
Explains the text messaging feature for driver communication.
Describes the destination message feature for informing drivers of new destinations.
Explains the ETA request message for arrival time and distance.
Details the connection and pinout for connecting a Garmin PND to FM6320.
Specifications for the LLS sensor series, including voltage and temperature.
Hardware details of the LLS sensors, including principle and output.
Instructions for connecting the LLS fuel sensor to the FM6320 device.
Retrieves information about records sorting parameter.
Sets roaming operator for a specific profile.
Retrieves modem status information via GPRS.
Retrieves current GPS data and time via GPRS.
Resets all FLASH profiles to default via GPRS.
Reads digital inputs, outputs, and analog inputs via GPRS.
Guidelines for connecting wires to the module, avoiding damage and interference.
Recommendations for connecting the power source, including fuse usage.
Guidance on identifying and connecting the ignition wire correctly.
Instructions for connecting the ground wire to the vehicle frame.
Recommendations for optimal placement of GNSS and GSM antennas.
General guidelines for installing the FM6320 module securely and safely.
Important safety precautions and warnings for device operation and handling.
Detailed safety instructions for operating the FM6320 device safely.
Copyright information and legal notices regarding the use of the document.
Overview of the document's content, including architecture and terms.
Lists all equipment included in the FM6320 device package.
Details the GSM/GPRS, GNSS, Hardware, and Interface features of the device.
Physical specifications of the FM6320 device interfaces and operating environment.
Information on the internal battery, operating time, and disposal instructions.
Detailed electrical characteristics of the FM6320 device, including voltage, current, and input/output parameters.
Specifies the absolute maximum electrical ratings for various parameters.
Step-by-step guide for inserting the SIM card into the FM6320 device.
Instructions for downloading and installing the necessary drivers for the FM6320 device.
Explains the meaning of the Navigate LED indications on the FM6320 device.
Explains the meaning of the Status LED indications on the FM6320 device.
Detailed description of the 2x10 socket pinout and its functions.
Describes the USB interface and its role in firmware updates and configuration.
Information on supported accessories like temperature sensors and iButtons.
Step-by-step guide to update the FM6320 device firmware via USB.
Explains how the FM6320 module acquires and sends data, and its communication modes.
Describes the Normal Mode and Deep Sleep Mode of the FM6320 device.
Details the functionality of the built-in 3-axis accelerometer for motion detection.
Explains the virtual odometer feature for calculating travelled distance.
Describes the 4 editable profiles for different operating modes.
Overview of the device's features.
Lists and describes the four available scenarios for FM6320 device operation.
Explains the Trip feature for monitoring and logging travel segments.
Describes the Geofencing feature for tracking entry/exit of defined areas.
Details the Auto Geofencing feature activated by ignition off.
Explains the iButton list for driver authentication in specific scenarios.
Instructions for starting and connecting the FM6320 Configurator program.
Overview of the FM6320 Configurator's main areas and layout.
Describes the main and additional buttons within the Configurator interface.
Explains the information displayed in the Configurator's information area.
Describes how to load and select profiles, global parameters, and external devices.
Configuration of global parameters common to all profiles.
Configuration settings for external devices like CAN, Analog Inputs, and COM ports.
Menu structure for device settings and configurable parameters.
Configuration of system settings like sleep mode and ignition source.
Configuration settings related to GSM module operations.
Configuration of GPRS parameters, including server domain, port, and protocols.
Configuration of data limits for Home and Roaming, with SMS notifications.
Settings for SMS login, password, and authorized phone numbers for security.
Configuration of the operator list for GPRS connection and profile switching.
Configuration of SMS messages sent upon triggering specific events.
Overview of configurable device features.
Configuration of data acquisition methods like time, distance, speed, and angle.
Configuration of scenarios like Eco Driving, Immobilizer, and Over Speeding.
Configuration of the Trip feature, including start speed and timeouts.
Settings for configuring up to 20 Geofence zones and border crossing events.
Settings for the Auto Geofencing feature based on vehicle stops and radius.
Configuration of the iButton list for driver authentication in Auto Geofencing.
Configuration parameters for CAN interfaces, including enable and baud rate.
Overview of available I/O elements and their configuration.
Lists all permanent I/O elements available on the FM6320 device.
Details on configuring I/O elements for monitoring and event generation.
Describes I/O properties like priority, high/low levels, and averaging constant.
Configuration parameters for the K-Line interface.
Tables of configurable parameter values for system settings.
Global and external device parameter values and their default settings.
How GSM operator codes influence profile switching.
How I/O events trigger profile switching.
An example of configuring profile switching based on DIN1 value change.
An example of configuring profile switching based on DIN1 value change from 1 to 0.
Describes the four ways GPS data is acquired and configured.
Configuration of time-based data acquisition using minimum period.
Configuration of distance-based data acquisition using minimum distance.
Configuration of angle-based data acquisition using minimum angle.
Configuration of speed-based data acquisition using minimum speed.
Explains how data is acquired using input/output elements.
How to configure data acquisition by I/O elements and event generation types.
Examples of different record event generation types for I/O data.
Configuration and functionality of ECO/Green driving scenarios.
Recommendations for mounting the FM6320 device for ECO driving functionality.
Parameters used specifically for the ECO driving/Green driving functionality.
Describes the events generated by ECO driving/Green driving functionality.
Configuration and functionality of the Overspeeding scenario.
Configuration of Immobilizer and Authorized Driving scenarios using iButtons.
Explains the working modes for COM1 and COM2 ports.
Describes the Silent Mode where the device performs no activity.
Describes the FM Log Mode, suitable for debugging.
Configuration for LLS (Liquid Level Sensor) mode.
Configuration for LCD display output.
Configuration for RFID HID mode.
Configuration for RFID MF7 mode.
Configuration settings for Garmin device integration.
Configuration for establishing communication via TCP Link Mode.
Configuration for establishing communication via TCP Link Mode in binary format.
Configuration for NMEA log mode via COM2 ports.
SMS command to retrieve the modem status information.
SMS command to get the current device time and week information.
SMS command to list available GSM operators.
SMS command to get acknowledgment of operators in active profile.
SMS command to get NMEA error debug information.
SMS command to get the last configuration date and time.
SMS command to retrieve current GPS data and time.
SMS command to load a specified profile into RAM Engine.
SMS command to reset the CPU.
SMS command to reset all FLASH profiles to default.
SMS command to retrieve device, modem, and code version information.
SMS command to read digital inputs, outputs, and analog inputs.
SMS command to get device runtime system information.
SMS command to delete all saved records from device memory.
SMS command to read input value by ID.
SMS command to set digital outputs to ON or OFF state with timeouts.
SMS command to read parameter value by ID.
SMS command to set parameter value by ID and new value.
SMS command to initiate data sending to a specified target server.
SMS command to get current GNSS information.
SMS command to check static navigation state.
SMS command to retrieve a list of banned operators.
Command to retrieve a list of possible device crashes.
Command to retrieve information about the bootloader and device state.
Command for odometer debug information.
General description of CAN bus and its automotive applications.
How to configure CAN settings using the Configurator's Manual CAN tab.
A sample CAN message structure and configuration example for fuel consumption.
Description of the AutoCAN function for automatic CAN scanning and configuration.
Steps to start CAN configuration and description of available columns.
How to start CAN bus monitoring and use monitoring filters.
How to configure CAN data sending when the device is not connected.
List of AutoCAN IDs for various vehicle data parameters.
Format for configuring AutoCAN parameters via SMS commands.
List of Element IDs for AutoCAN configuration.
Instructions for connecting the FM6320 to a tachograph device.
List of supported Garmin FMI protocols and their benefits.
Details standard protocols like Text Message and Stop protocols.
Details enhanced protocols like Canned Responses and Status Protocol.
Lists supported features on the Tavl client application for Garmin FMI.
Explains the text messaging feature for driver communication.
Describes the destination message feature for informing drivers of new destinations.
Explains the ETA request message for arrival time and distance.
Details the connection and pinout for connecting a Garmin PND to FM6320.
Specifications for the LLS sensor series, including voltage and temperature.
Hardware details of the LLS sensors, including principle and output.
Instructions for connecting the LLS fuel sensor to the FM6320 device.
Retrieves information about records sorting parameter.
Sets roaming operator for a specific profile.
Retrieves modem status information via GPRS.
Retrieves current GPS data and time via GPRS.
Resets all FLASH profiles to default via GPRS.
Reads digital inputs, outputs, and analog inputs via GPRS.
Guidelines for connecting wires to the module, avoiding damage and interference.
Recommendations for connecting the power source, including fuse usage.
Guidance on identifying and connecting the ignition wire correctly.
Instructions for connecting the ground wire to the vehicle frame.
Recommendations for optimal placement of GNSS and GSM antennas.
General guidelines for installing the FM6320 module securely and safely.
General| Tracking sensitivity | -165 dBM |
|---|---|
| GSM | Quad-band 850/900/1800/1900 MHz |
| Analog Inputs | 2 |
| Operating temperature | -40 °C to +85 °C (without battery) |
| Technology | GSM/GPRS |
| GNSS | GPS, GLONASS |
| Data transfer | GPRS class 12 |
| SMS | Yes |
| Bluetooth | 4.0 |
| Internal Back-up Battery | Li-ion 3.7V |
| 1-Wire | Yes |
| CAN | Yes |
| USB | 1 |
| Internal Storage | 128 MB flash memory |
| Expandable Storage | MicroSD up to 32GB |
| Battery | Li-ion 3.7V |
| Connectivity | GSM/GPRS, Bluetooth |
| Ports | USB, RS232, CAN, 1-Wire |
| Certifications | RoHS |
| SIM | Dual SIM |
To Next Page
