Teltonika FMB140 First Start-Up Quick Start Guide

https://wiki.teltonika-gps.com/view/FMB140_First_Start
FMB140 First Start
Main Page > CAN Trackers & Adapters > FMB140 > FMB140 First Start
GNSS/GSM/Bluetooth tracker with integrated CAN chip, internal GNSS/GSM antennas and
internal battery
Contents
1 How to insert Micro-SIM card
2 Battery placement after complete device disassembling
3 2x6 socket pinout
4 Mounting recommendations
4.1 Installation photos
5 Safety information
5.1 Precautions
How to insert Micro-SIM card
Gently remove FMB140 cover using plastic pry tool from both sides.1.
Insert Micro-SIM card as shown with PIN request disabled or read Security info how to2.
enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing
forward to slot.
Attach device cover back.3.
Device is ready to be connected.4.
Micro-SIM card insertion/removal must be performed when device is powered off –
external voltage and internal battery disconnected. Otherwise Micro-SIM card might be
damaged or device will not detect it.
Battery placement after complete device disassembling

Teltonika FMB140 Specifications

General

Purpose	Car
Product color	Black
Electronic compass	No

Weight and Dimensions

Weight	55 g