RUT905 HSPA+ Router
CERTIFIED
ORGANISATION
ISO 9001
Quick start guide v2
4
This sign on the package means that it
is necessary to read the User's
Manual before you start using the
device.
This sign on the package means that all
used electronic and electric equipment
should not be mixed with general
household waste.
Please visit our web site for more informationwww.teltonika.lt
Hereby, Teltonika declares that this RUT230 is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
Login to device
1. To enter router's Web interface type in your internet browser.http://192.168.1.1
2. Use the following parameters when prompted for authentication:
3. Configuration Wizard will start after logging in. It is necessary to complete Configuration Wizard to
setup router to correct mode. You can leave default settings but it is strongly recommended that you change
the password and enable Wireless Security.
4. Go to Status > Network and pay attention to Signal Strength. To maximize the performance try adjusting
antennas or changing location of your device to achieve best signal conditions.
LAN
OpenVPN
860461024004296
-44 dBm
OK
To Next Page
Need help?
General
