Need help?Do you have a question about the TEM EKO + and is the answer not in the manual?
Explains indicators for scale status, weight, tare, battery, and ranges.
Details function of T, -O-, F, backlight keys and HOLD MODE.
Describes scale startup sequence and initial display indicators.
Instructions on placing product, waiting for equilibrium, and zeroing.
Steps for using tare, net weight display, and cancellation.
Explains ON, OFF, and ON_OFF backlight modes.
Describes automatic backlight turn-off condition.
How to enter and navigate the settings menu.
Procedures for modifying numerical settings and saving.
Step-by-step example of setting startup delay.
Configuration for tare behavior and cancellation.
Parameters for zero setting range and tracking.
Functions dependent on weighing stability.
Settings related to battery indicator and power saving.
Configuration for median filter and average length.
Covers calibration coefficient, capacity, division, and load cell.
Settings for unit selection and gravity value.
Settings for RS232 communication and data transmitting.
Includes approved scale mode, startup delay, and calibration switch.
Provides solutions for various error messages (ERROR1-ERROR16).
Explains 'Lo bAtt', 'Nnnnnn', and 'Full' error indicators.
Interprets short beep, double short beep, and long beep signals.
Explains beeps for failed operations and low battery warnings.
General| Maximum weight | 5 kg |
|---|---|
| Accuracy | 1 g |
| Display | LCD |
| Auto Power Off | Yes |
| Overload Indicator | Yes |
| Low Battery Indicator | Yes |
| Type | Electronic Kitchen Scale |
| Platform Size | 150 x 150 mm |
To Next Page
