ENGLISH
2
DISPLAY & KEYBOARD
Zero Indicator: Shows that the weighing plate is empty. Before weighing a product, be sure
that the weighing plate is empty and press “O” key for zero setting if the “O” indicator is off.
Otherwise error may occur.
Equilibrium Indicator: Shows that the load on the weighing plate is well stabled. It is off while
placing or removing the product. If Equilibrium Indicator goes off, the weight shown on the display may
be wrong. Therefore, in order to read the weight, wait until Equilibrium Indicator symbol appears after
placing the product on the weighing plate.
NET NET Indicator: It is ON, when there is a tare. Actual weight value is NET weight value.
Tare Indicator: Shows that the tare effects the weighing. It flashes when the tare is not fixed.
It is continuously on when the tare is fixed. (Only for scales with LCD display.)
M Total Memory Indicator: It flashes when the total memory is containing a value. It remains
continuously on while the content of the total memory is being displayed.
Battery Indicator: Shows that the battery is in use. If Battery indicator is ON, scale is powered
by the battery. If it flashes, it is necessary to charge or change the battery in the shortest period.
Weighting instrument that designed with using LCD type display modules has four battery sections
indicating the current charge level of the battery. Also, a battery charging animation mode activated
when the power supply connection is established. While the power supply connection is not established,
the battery frame around the battery indicator appears, indicating that the battery is in use. Just before
the battery becomes empty, the battery frame starts flashing.
W1 and W2 Indicators: Shows actual weighing range (Valid only for d range scales). Check max, min,
e values of each range on data plates.
T Key : Used for accepting the load as tare.
O Key : Used for zero setting the scale when the weighing plate is empty.
F Key : Used for reaching settings menu and some functions similar to settings.
☼ Key : Toggles backlight between ON, OFF, ON-OFF (Only for LCD models)
HOLD MODE: This feature is valid for non-approved devices. Hold mode is entered by pressing and
holding the backlight button and “HLdOn” appears on the screen. In this mode, pressing the backlight
key shortly; weight, unit price, total displays are fixed for seconds and weight screen blinks. To exit from
this mode, press and hold the backlight button and “HLdOff” will appear on the screen.
To Next Page
Loading...
