ENGLISH
9
WARNING SIGNALS
Short beep : Any key pressed.
Double short beep : Indicates the pressed key has no use for the related function.
Long beep : Same frequency with short beep. Indicates second function of the pressed key
is activated.
Short beep and long beep with different frequency: Indicates desired operation could not be operated.
For example, pressing Tare key when Equilibrium indicator is off.
Regular short beep for 10 seconds: When battery is low, scale signals in every ten seconds. At the
same time, battery indicator flashes. It means that the battery is going to be empty and weighing
cannot be done after a while. Power supply should be connected as soon as possible. If you continue
weighing without power supply, it continues signaling. Press F key to cancel signaling. Look at the red
light on power supply to make sure it is functioning.
To Next Page
Loading...
