Temcoline T32 - User Manual

T30 SERIES PID Controller
User's Manual
www.temcoline.com
SERIES
T30
T32/ T33/ T34/ T37/ T39
DIGITAL PID CONTROLLER

Temcoline T32 Specifications

General

Brand	Temcoline
Model	T32
Category	Controller
Language	English

Summary

Safety Requirements

Input Ranges and Output Configuration

Supported Input Signal Types and Ranges

Lists supported input types like TC, RTD, Voltage, Current with their ranges.

Output Signal Types and Configuration

Details output signal types (Relay, SSR, SCR) and their configurations.

Controller Installation Procedures

T34 Series Installation Guide

Step-by-step instructions for installing the T34 series controller.

T32, T33, T37, T39 Series Installation Guide

Step-by-step instructions for installing T32, T33, T37, T39 series controllers.

Terminal Arrangements and Wiring Diagrams

T32;T33 Terminal Wiring

Wiring diagrams for T32 (48x96mm) and T33 (96x48mm) models.

T37 Terminal Wiring Diagrams

Wiring diagrams for the T37 (72x72mm) model, including options.

T39 Terminal Wiring Diagrams

Wiring diagrams for the T39 (96x96mm) model.

Features and Functions

Pre-Use Checks and Default Settings

Default Factory Settings

Lists the default input and output settings at the time of manufacture.

Initial Installation and Operation Procedures

Verify Input and Output Specifications

Instruction to check input and output specifications and default settings.

Set Auto-Tuning or PID Parameters

Accessing Set Menu and Setting Methods

Input and Output Type Setting

Procedure for setting input and output types before auto-tuning.

Set Value (SV) Adjustment

Auto Tuning (AT) Function

Instructions for starting and stopping the auto-tuning process.

Setting mode

General Setting Mode Parameters

Alarm (ALARM1, 2) Setting

Primary Function Details

Auto Tuning (AT) Function Explained

Detailed explanation of the auto-tuning function and its usage.

Error Indication During Operation