Temcoline T39 - User Manual

T30 SERIES PID Controller
User's Manual
www.temcoline.com
SERIES
T30
T32/ T33/ T34/ T37/ T39
DIGITAL PID CONTROLLER

Temcoline T39 Specifications

General

Brand	Temcoline
Model	T39
Category	Controller
Language	English

Summary

Critical Safety Warnings and Cautions

1. Ordering Information

2. Input Ranges and Output Configuration

Supported Input Ranges

Details on various input types and their temperature or value ranges.

Output Configuration Details

Output Signal Types and Settings

Explanation of different output settings like Relay, SSR, and SCR.

3. Dimensions and Panel Cutouts

6. Installation Guide

T34 Series Panel Mounting Procedure

Step-by-step guide for mounting the T34 series controller.

T32;T33;T37;T39 Series Mounting

4. Terminal Arrangements and Wirings

T32;T33 Terminal Layout and Wiring Diagrams

Terminal connections and wiring diagrams for T32 and T33 models.

T34 Terminal Layout and Wiring Options

Terminal connections and wiring options for the T34 model.

T37;T39 Terminal Layout and Wiring Diagrams

T37 Terminal Layout and Wiring

Terminal connections and wiring diagrams for the T37 model.

T39 Terminal Layout and Wiring

Terminal connections and wiring diagrams for the T39 model.

5. Ratings and Specifications

6. Features and Functions

Controller Display and Button Functions

8. Initial Installation and Operation Procedures

Initial Setup and Operation Steps

Procedures for initial installation, wiring checks, and minimum operation.

9. Entering Set Menu and Setting Method

Input and Output Type Configuration

Post Auto-Tuning Input;Output Settings

Modifying Input;Output Settings After Auto-Tuning

Set Value Adjustment and Auto-Tuning Process

Setting Target Value (SV) and Initiating Auto-Tuning

Steps for setting the target value and starting the auto-tuning function.

11. Setting Modes Explained

Initial Setting Mode Configuration

Setting Initial Parameters and Configuration

In;Output Setting Mode and Data Protection

Configuring In;Output Settings and Data Lock

12. Alarm Settings (ALARM1, 2)

Hold Function for Alarms

Alarm Output Types and Selection Codes

Selecting Alarm Types and Operations

Detailed guide on alarm types, codes, and their output operations.

13. Primary Function Details

Auto-Tuning (AT) Functionality

Explanation of the auto-tuning process for PID controller optimization.

Manipulated Variable (Mvn) Check Mode

Alarm Functions and Delay Times

Alarm Delay Time Settings

Setting delay times for Alarm 1 and Alarm 2 outputs.

Control Loop Break Alarm (LBA) and Causes

LBA Activation Conditions and Description

Retransmission Output Configuration

Configuring Retransmission Output Type and Scale

Input Signal Processing Functions

Digital Input Filter (_FLT)

Input Value Correction (_INS)

Upper Limit Input Correction (_ING)

Decimal Point and Free Scale Limits

9. Error Indications During Operation