Need help?Do you have a question about the Temcoline T52 and is the answer not in the manual?
General| Brand | Temcoline |
|---|---|
| Model | T52 |
| Category | Controller |
| Language | English |
Serious injury or death may be caused if instructions are not observed.
Failure to observe instructions may cause damage or injury.
Details various input types and their corresponding temperature ranges and accuracy.
Explains how to configure up to three different alarm outputs for various types.
Provides physical dimensions and panel cutout details for T52, T53, and T54 models.
Provides physical dimensions and panel cutout details for T57 and T59 models.
Details the mounting procedure for the T54 series controller.
Details the mounting procedure for T52, T53, T57, and T59 controllers.
Shows the terminal layouts and wiring diagrams for T52 and T53 models.
Shows the terminal layouts and wiring diagrams for T54 models.
Shows the terminal layouts and wiring diagrams for T57 models.
Shows the terminal layouts and wiring diagrams for T59 models.
Guides users on how to set the input sensor type and output type.
Explains how to set and store desired set values (SV) for the controller.
Describes the process for performing quick auto-tuning for PID parameter optimization.
Provides access to frequently used functions, hiding less common ones.
Allows viewing and manual operation of the control output percentage.
Limits the display range of menus to prevent user miscontrol after configuration.
Covers LEVEL lock, EASY menu, Mv display, AT type, LBA, Run/Stop, and Heater time.
Configures control zone, fast mode, ramp function, and digital input selection.
Allows setting up to three different control set values (SV1, SV2, SV3).
Guides on performing PID auto-tuning for optimal control.
Allows viewing and manually adjusting PID parameters determined by auto-tuning.
To Next Page
