Temcoline T52 - Error Indication During Operation

www.temcoline.com
DIGITAL PID CONTROLLER
11) Error indication during operation
(1) B.OUT : INPUT SENSOR error or burn out etc.
(2) +OVR :
Out of maximum input range (refer to input group setting) or overheating
(3) -OVR : Out of minimum input range (refer to input group setting) or overcooling
(4) SYS.E : SYSTEM setting error or Memory damage (request for repair)
(5) RJC.E : RJC Sensor damage or PCB burn (request for repair)
(6) EEP.E : EEPROM damage (request for repair)
(7) COM.E : Communication ERROR (request for repair)
(8) AT.E : Auto Tuning Error, Checking heater break or controller
45