To Next PageTo Next Page
Need help?Do you have a question about the Tempco TEC-4100 and is the answer not in the manual?
General| Brand | Tempco |
|---|---|
| Model | TEC-4100 |
| Category | Temperature Controller |
| Language | English |
Guides on unpacking the controller and the process for mounting it into a panel.
Provides essential precautions for wiring, including power, terminals, and grounding.
Details how to connect the power supply, including fuse and switch recommendations.
Guides on proper sensor placement, type selection, and error considerations.
Shows wiring connections for various sensor types like TC, RTD, mV, and mA.
Illustrates wiring options for Output 1, including relay, Triac, and SSR connections.
Details parameter lockout security and signal input selection for sensors and units.
Explains the four available control modes for Output 1 and Output 2.
Explains how the controller transfers to a safe state upon sensor break or A-D converter failure.
Details the auto-tuning process, its applications, and error handling (ATER).
Details manual calibration steps for A/D converter, RTD inputs, and cold junction compensation.
Covers cold junction calibration setup and linear voltage/current input calibration procedures.
Lists common error codes, their descriptions, and recommended corrective actions.
