Tempco TEC-9100 User Manual

Page 6 of 12
Parameter Descriptions (TEC-9100 Temperature Controller)
Controller Parameter Descriptions that are not applicable are not shown in the above table.
NOTE:
It is strongly recommended that a process should
incorporate a LIMIT CONTROL such as the
TEC-910 which will shut down the equipment at
a preset process condition in order to preclude
possible damage to products or system.
Information in this user's manual is subject to change
without notice.

Tempco TEC-9100 Specifications

General

Brand	Tempco
Model	TEC-9100
Category	Controller
Language	English