TEMPUR-Ergo
®
Premier
TEMPUR-Ergo
®
Smart Control Operating Instructions
Once your Wi-Fi Module is installed, you can operate
your bed from your smartphone or tablet. This section
identies all of the adjustments and settings you can
control from your device.
USING THE HEAD AND LEG LIFT CONTROLS
Tap and slide* the +/-
button for either the Head
or Leg sliders until the
desired height is reached.
Press the FLAT button
and the bed frame
automatically moves to its
complete at position.
SAVING AND RECALLING MEMORY POSITIONS
To save a position on the
bed, tap and hold one of
the numbered memory
positions for 3 seconds.
To recall a memory
position, tap the numbered
memory button.
USING MASSAGE FEATURES
Tap and slide* the +/-
button for the Head,
Lumbar, or Leg to adjust
the massage intensity.
When the massage motor
is in operation, the text
below the slider, which
indicates the active zone,
is green.
Tap one of these buttons
to select the desired
massage mode.
Tap the STOP button to
stop the massage.
*NOTE: Sliders are the default setting. If you
prefer push buttons you may select this option
in the App Settings.
8
CUSTOMER SERVICE: 1–800–821–6621
To Next Page
Loading...
Need help?
General
