EasyManua.ls Logo

TEMPUR Arc - Fire Safety; Assembly; Cleaning and Maintenance

TEMPUR Arc
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
EN
Fire safety
Bed products comply with applicable safety standards, which may vary depending on the
product or the region. Further information is available upon request.
Carelessness causes fire - we strongly recommend that you do not smoke in bed.
WARNING
Risk of fire: keep products away from open flames.
Assembly
For correct and safe assembly, PLEASE SEE THE ASSEMBLY
GUIDES FOR FULL INSTRUCTIONS.
Cleaning and maintenance
A clean bedroom can have a big impact on your sleeping environment and therefore
sleep quality.
To ensure the preservation of your bed’s appearance, we recommend regular vacuuming
with a soft fitting, preferably once a week. This gently removes the dust from the surface
without damaging the textile and reduces dust collection.
IMPORTANT
Always remove stains as quickly as possible before it penetrates the fibres. This
may result in a permanent stain.
Avoid soaking as this can seep through the fabric and damage the underlying
material.
DO NOT rub the material too vigorously to remove a stain as this may damage
the material.
NOTICE
For liquid spills, absorb as much of the liquid as possible with a plain white
kitchen paper towel or cotton cloth to avoid a permanent stain.
Most spots can be removed
with lukewarm water, using a pH-neutral
dishwashing detergent if necessary.
If a stain or spot has dried, remove as much as possible by vacuuming with a soft
brush fitting.

Related product manuals