13
Child Lock Feature
Children and pets can be crushed or killed in moving parts of the bed!
For safety purposes, the child lock function locks the remote control
to prevent any accidental button presses and bed movements.
Engage child lock on the remote control before leaving the room.
Remote Pairing
The original remote that comes in the box is already paired to the
adjustable base. No further action is required. In the event that the
remote is not paired with the base, follow the steps below.
Activate Child Lock
Deactivate Child Lock
remote control
Test all remote functions. If the remote buttons do not impact the
adjustable base movements, please repeat the process again or call
customer service: U.S. 1-800-499-1965 | Canada 1-800-268-4414
STEP 1
STEP 2
STEP 3
Remove rear cover of the remote control by sliding it down to expose
the PAIR button. Unplug the Power Cord from your power outlet.
Wait 1 minute, then plug it back in to your power outlet. Soundbar
will provide verbal cue 'Bluetooth Mode' to indicate it is ready for
pairing. Perform Step 2 within 10 seconds, while the control box
light is flashing.
Power Supply
Power Cord
Press and hold the PAIR button on the back of the
remote. The PAIR button will illuminate and start
to flash. When the PAIR button stops flashing, the
LED light on the control box will stop flashing.
Soundbar will provide verbal cue 'Connected' to
indicate the remote has paired successfully to the
control box. Release the PAIR button.
Press/hold dedicated Child Lock button for three (3)
seconds.
The remote LED will flash twice to confirm activation.
When any button is pressed on the remote while
in child lock mode, the LED illuminates for two (2)
seconds or while button is pressed.
*C h ild Lo c k fe at ure w ill be deactivated when batteries
are removed.
Press/hold dedicated Child Lock button and the
Underbed Lighting button together for three (3)
seconds.
The remote LED will flash once to indicate the remote
is no longer in Child Lock. The remote and adjustable
base will work normally.
+
WARNING
To Next Page
Loading...
