TEMPUR ERGO PROSMART - Remote Control; Remote Functions and Presets

11
Remote control arrives paired to the adjustable base.
Two (2) AAA batteries are required to operate the remote.
remote control
ADJUST
Head Position Adjustments
Use to raise and lower the head section of your
adjustable base.
Foot Position Adjustments
Use to raise and lower the foot section of your
adjustable base.
Lumbar Adjustments
Use to increase or decrease lumbar support.
PRESET
Zero-G
®
‡
Adjusts your legs to relieve pressure off the lower back.
Flat *
One-Touch Flat lowers head and foot to flat position
and turns off massage (if running).
TV in Bed Preset Position ‡
Brings head and foot into position for viewing TV.
QuietMode™ Preset Position ‡
Help relieve snoring for you or your partner with the
push of a button, gently tilting the mattress position to
help reduce snoring.
Favorite 1 & 2 Preset Position ‡
Reprogrammable Preset Positions.
Underbed LED lighting *
Press to turn on/off underbed LED lighting. Press
and hold for three (3) seconds to turn off LED brand
badge.
* Not user programmable.
‡ Can be reprogrammed to user desired position.
The Zero-G
®
, TV in Bed, Anti-Snore, and Favorite 1 in bed presets
can be re-programmed to any position chosen by the user.
Simply adjust the bed to the desired position, then press and
hold any of the 4 buttons down until the remote backlight flashes
twice. The button is now re-programmed.
To restore the buttons to their original positions, press and hold
the One-touch Flat and Zero-G
®
buttons simultaneously for 5
seconds. The remote backlight will flash twice to indicate the
original positions have been restored.