Tenda AC21 - Connect Devices to the Wifi Network Using the PIN Code of the Router

56
5.6.4 Connect devices to the WiFi network using the PIN code
of the router
The router only supports WPS connection by entering the PIN code on wireless devices, which is
usually used on WiFi network adapters. Please refer to the user guide of the WiFi network adapter for
configuration details.
Configuring procedure:
Step 1 Find the PIN code of the router.
You can find the PIN code on the label on the bottom panel of the router.
You can also log in to the web UI of the router, and navigate to WiFi Settings > WPS. The
PIN code is shown under Method 2.
Step 2 Enter the PIN code on the wireless device that supports WPS connection using the PIN
code.
---End
Wait a moment until the WPS negotiation is completed, and the wireless device is connected to
the WiFi network.