Insert the power adapter to your router’s PWR port, and plug the other end to a power outlet.
Insert the Ethernet cable into the router’s WAN port.
Connect your computer to the router:
You can connect your computer to the router wirelessly or via an Ethernet cable.
Wired:
Connect your computer to the router using the included Ethernet cable.
Wireless:
To connect with WiFi, use the WiFi name and password on the product label. And your computer
MUST have a wireless adapter.
WiFi Name: Tenda_XXXXXX (Default)
No WiFi password set by default.
XXXXXX is the last six characters of the router’s
MAC address.
To Next Page
Loading...
