Configuration
❶ DDNS Service: Check the Enable box to enable the DDNS feature.
❷ Service Provider: Select your DDNS service provider from the drop-down menu. Here you
can only use dyndns.org and no-ip.com.
(If you haven’t got a DDNS account, click Sign up next to the pull down menu to sign in an DDNS
account and then come back to continue the settings with the DDNS domain name, username and
password.)
❸ User Name, Password, Domain Name: Enter the registered user name, password and domain
name.
❹ Click OK to activate your settings.
Verification
After the configuration above, your friend can access your ftp server via ftp://tenda.dyndns.org
instead of ftp://183.38.7.216:21 to download the giant file.
UPnP Settings
When UPnP is enabled on your Router, a network device possessing a specific purpose, such as a
printer, can be identified and used automatically by another computer or device on your network.
If the UPnP protocol is disabled, devices behind the Router may have difficulty communicating
their identification or purpose. Access your Tenda Router to turn on UPnP.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
