Tenda F3 User Manual

68
MAN, you should go to COMPUTER2.
To avoid such inconvenient switch over these two isolated networks, as well as expand your
Internet service to more wireless devices, you can add this Tenda Router and set up a static routing.
Connect and configure the devices as below. Parameters here are examples.
Connection & Parameters Notes
1. Tenda Router and your located router (Router 1) should be connected via their LAN ports.
And both routers should be in the same network segment. Here both are in 192.168.0.0 segment.
Also, their LAN IP should be different. Here one is “192.168.0.1”, the other is “192.168.0.10”.
2. Your located router (Router 1) should disable its DHCP server. If you want to connect more
devices to Router 1, you should configure static IP for every wanted device which can also both
connect to the Internet and MAN.
Configuration

Tenda F3 Specifications

General

Color	white
Wi-Fi Speed	300 megabits per second
Band Technology	single
Frequency Band	2.4 ghz
Beamforming	yes
Ethernet Standard	10/100
Ethernet Switch	yes
Wireless Standard	n
Antennas	3
Firewall	none
Data Encryption	yes
Encryption Type	wpa, wpa-psk, wpa2, wpa2-psk
Security Features	wpa algorithm: aes, tkip, tkip&aes; wireless access control: mac address filtering
Ports	rj-45
LAN Ports	3
WAN Ports	1

Weight and Dimensions

Height	1.02 inches
Width	5.02 inches