❸ Policy Name (Optional): Enter a descriptive name for the policy, or leave it blank.
❹ Start IP, End IP: Enter 100 and 120 in corresponding fields to limit devices within the IPs.
To restrict one device, input the same number in corresponding field. For example, the IP of the
device you want to restrict is “192.168.0.13”. Enter ‘13’ in both Stat IP and End IP field.
❺ Port: Enter 1-65535 to forbid all Internet services and applications.
❻ Type: Select Both.
❼ Time, Day(s): Select 0 for a whole day and Sun~Sat for a whole week.
❽ Enable: Check the box to enable the settings.
❾ OK: Click OK to save the settings.
How to permit clients with specified IP addresses?
Select Permit Only from the pull-down menu of the Filter Mode option. And consult steps ❷~❾
in the example above.
How to disable Client Filter?
Select Disable from the pull-down menu of the Filter Mode option and click OK.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
