Internet
Setup
Chapter II Internet Setup
Step 1: Connect Your Device
Note:
1. Do confirm your access type matches this GPON ONU before selecting it. Mainstream fiber
access technology can be divided into two incompatible types: EPON and GPON.
2. When this device is powered on, please do not look straight the PON port in the eye and the
laser beam in the optical fiber to avoid eye damage.
1. Connect the fiber to the PON port of your device;
2. Connect your PC to the LAN port of your device using an Ethernet cable;
3. Connect the included power adapter for power supply;
4. Press the ON/OFF button on the device to power it on.
Tips:
1. You can also connect a router or other Ethernet device to the LAN port of this device.
2. When this device is powered on, you can press the Light button to turn on/off all LED lights.
To Next Page
Loading...