Product
Overview
Interface / Button Description
PON SC/UPC fiber optic port for connecting to the optical network
LAN
The RJ45 port which is used for connecting to the PC, Router or
other Ethernet device
PWR Power receptacle for connecting to the included power adapter
ON/OFF ON/OFF button for powering on/off the device
RST
Pressing it for over 4 seconds restores the device to factory default
settings.
Light LED indicators button for turning on/ off LED lights of this device
3.2 Label
1. This device’s default login IP address for accessing its web management page.
2. This device’s login username, neither configurable nor needs to be entered.
3. This device’s default login password. For better security, we strongly recommend you
change it on the Device Management > Change Login Password page.
To Next Page
Loading...