19
Parameter Description:
Enter a unique VLAN Policy name.
Enable/disable AP's 802.1Q VLAN feature.
After this feature is enabled and this VLAN policy is delivered to AP, "VLAN ID" in Manage Policy > SSID
policy takes effect.
Enter the VLAN ID of AP’s Trunk port. The default value is 1.
AP's Management VLAN ID.
If a policy with this value modified is sent to the AP, the AC cannot mange the AP any more. To recover
this function, choose System Tools > Network setting > VLAN Settings, and set the VLAN ID same as that
of the AC.
A management computer can access the AP’s Web UI only when it is in the same VLAN with the AP.
Select wired LAN port as a trunk port which allows all VLAN packets to pass.
If AP has only one LAN port, select LAN0.
Display the port(s) in access mode. If a port has been set to a trunk port, it cannot be an access port.
Set up the Access port's VLAN ID.
Display whether the Policy is used or not.
Modify the parameters except Policy name.
To Next Page
Loading...