Tenda M3 - VLAN Policy

18
Parameter
Description
connect to 5 GHz band in higher prority, which helps the AP to reduce interference and workload in 2.4
GHz band and hence improve user experience.
Status
Display whether the Policy is used or not.
Action
Use for modifying the parameters except Policy name.
You are not recommended to modify the Used policies.
3.2.3 VLAN policy
Here you can view the basic information of VLAN policies. VLAN policy includes AP's PVID, management VLAN,
trunk ports, and so on.
To create a VLAN policy, click Manage Policy > VLAN Policy to enter the page below.
Button Description:
Button
Description
Used to add VLAN policy.
Used to delete the selected VLAN plicies in Not Used status.
Used to modify the parameters except Policy name.
You are not recommended to modify the Used policies.
Add VLAN policy
To add a VLAN policy, go to Manage Policy > VLAN Policy, and click + Add .