52
Method 1: Log in to the web UI of the AC, click System Tools > Maintain > Maintenance, and then click Reboot.
Method 2: Disconnect the AC from power supply and then reconnect the AC to power supply.
Backup Configuration
If you have configured many settings on this device, which will make this device work in good status and suitable
environment, it is suggested to backup settings for this device, which will be convenient for troubleshooting and
saving time for next time configuration. Click Backup then follow onscreen instructions.
Restore Configuration
If you happen to do some configurations, only to find that reduces the AC’s performance, in this case, you can
restore the device to its previous configurations. Click Select a file corresponding to Restore Configuration,
select your former configuration file and then follow onscreen instructions.
Reset
If you need to log in to the AC’s web UI, but forget the login user name or login IP; or you have some trouble in
surfing the Internet but unable to find where the problem is, it is advisable to restore this device to default
factory settings.
Here are two methods to restore the AC to default factory settings:
Method 1: Reset by pressing the RESET button for at least 6 seconds, and then wait for about 45 seconds.
Method 2: Reset by clicking Reset on the System Tools > Maintain page.
After restoring this device to factory settings, you need to use the default IP address (192.168.10.1) and login user name
and password (admin/admin) to relog in to the management webpage. For other default settings, see Default Factory
Settings.
3.5.5 Date&Time
Here you can set your AC's system time and Web expired time. Click System tools > Date&Time to enter the page
below.
To Next Page
Loading...