51
Firmware Upgrade
Firmware upgrage operation allows you to enjoy more functions and more stable performance. We recommend
you go to www.tendacn.com to find out the corresponding software to upgrade the AC.
When an AP firmware is upgrading, please DO NOT power off the AP, otherwise it may cause damage to the AP! If a
sudden power failure occurs, please upgrade again. If you cannot log in to AP's Web UI after a sudden power failure,
please contact our technical support.
Configuration steps:
Step 1 Go to the official website www.tendacn.com to download the corresponding software to the local PC
and unzip it.
Step 2 Log in to the web UI of AC and click System Tools > Maintain > Maintenance.
Step 3 Click Select a file, select the software you’ve downloaded just now and follow onscreen guidelines to
upload the software.
Step 4 Click OK in the popup window.
Step 5 Wait for a few minutes until the upgrade completes.
----End
Click System Tools > System Status to check firmware version, to see whether the AC was successfully upgraded
into the version you need.
Reboot
If a setting does not take effect or the AC works improperly, you can try rebooting the AC to resolve the problem.
Two methods to reboot the AC:
To Next Page
Loading...