21
Signal interference between APs can be effectively reduced by adjusting the transmit power of AP. If it
is a capacity-oriented network, please select High Density. Otherwise, select Coverage.
Select a Signal Reception Method based on different scenarios.
Coverage: It is used in a coverage-oriented network to ensure a higher WiFi coverage.
High Density: It is used in a capacity-oriented network to ensure a better signal quality.
Default: The signal reception is between coverage and high density.
Display whether the policy is used or not.
Modify the parameters except policy name.
You are not recommended to modify the Used policies.
Maintain Policy
This section helps you configure the maintain policy, including LED status and auto maintain.
Click + Maintain Policy to add a maintain policy.
To Next Page
Loading...