23
Parameter Description:
Enter a unique policy name. Duplicated names are not allowed.
Enable/Disable the software alert function.
When enabled, please enter the IP address of the host used to receive alert logs, and the AC will send
alert logs directly to the alert client program running on the host.
For the description of alert client program, please refer to Running Alert Client.
Enable/Disable Email alert function. With this function enabled, the AC will reqularly send alert logs to
the email you entered here.
Enter the server port of the sending email.
Enter the password of the email used to receive alters.
It specifies at which interval the alter email is sent.
Enable/Disable AP failure alert function. If enabled, the AC will send alert logs, such as AP reboot, AP
online or offline, and so on.
Enable/Disable AP Traffic Alert. If enabled, the AC will send alert logs when AP traffic reaches its limit.
To Next Page
Loading...