17
Static IP requires a group of IP info provided by your ISP. Type them in the corresponding field.
③ Finish the wireless setup. (Recommended)
④ Click OK.
Bridge
① Link Type: Select Auto or Ethernet.
② Select Bridge connection type.
③ Finish the wireless setup. (Recommended)
④ Click OK.
When Bridge mode in Ethernet access is enabled, dial up from the local PC with the account provided by your ISP for
Internet service.
Test Internet Connectivity
After the device is correctly set, it may get to the Internet. (Connection Status: Connected)
You can launch a web browser and search www.tendacn.com. If the webpage displays, you are able to enjoy the Internet
service.
To Next Page
Loading...
