Tenda TEG1024G User Manual

1.3 Front Panel and Rear Panel Specifications
On the front panel, there are 16/24 1000Mbps RJ45 ports and LED
indicators as well as 1 power indicator.
Front panel view of the TEG1024G Switch
On the rear panel there are 1 AC power port and the matched power
supply mark.
Rear panel view of the Switch
1.4 LED Indicator Specifications
The LED indicators of the Switch include Power, Link/ACT and
1000Mbps indicators. You can see their operating situation through
these green LED indicators.
4

Tenda TEG1024G Specifications

General

MAC address table	8000 entries
Maximum data transfer rate	1 Gbit/s
Supported data transfer rates	10/100/1000 Mbps
10G support	No
Full duplex	Yes
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
Copper ethernet cabling technology	1000BASE-T, 100BASE-TX, 10BASE-T
Input frequency	50/60 Hz
Size (imperial)	19 \
Dimensions (WxDxH)	208 x 440 x 44 mm
Networking features	Ethernet, Fast Ethernet, Gigabit Ethernet
Connectivity technology	Wired
Switch type	Unmanaged
Switch layer	-
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
SFP/SFP+ slots quantity	0
Basic switching RJ-45 Ethernet ports quantity	24
Certification	CE, RoHS
Product color	Blue
LED indicators	Link, Power
Housing material	Metal
Input voltage	100 - 240 V
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85176990