11N Wireless Broadband Router
72
¾ Destination LAN IP: The address of the remote
host with which you want to construct a static
route.
¾ Subnet Mask: The network portion of the
Destination LAN IP.
¾ Gateway: The gateway of the next hop, usually
the Router or host’s IP address.
Note：
1. The gateway must keep the same segment with
the Router’s LAN IP address.
2. If the destination IP address is one host’s IP
address, the Subnet mask should be
255.255.255.255.
3. If the destination IP address is an IP address
range, the subnet mask should match the IP
address. For example, if the IP is 10.0.0.0, subnet
mask should be 255.0.0.0; if the IP is 10.1.2.0,
subnet mask should be 255.255.255.0.
To Next Page
Loading...
Need help?
General
