Need help?Do you have a question about the Tenda W330R and is the answer not in the manual?
General| Bandwidth | 2.4 GHz |
|---|---|
| Input voltage | 110 - 240 V |
| xDSL connection | No |
| Power requirements | AC 9 V, 1.2 A |
| Networking features | Ethernet, Fast Ethernet, Gigabit Ethernet, WLAN |
| Ethernet LAN | Yes |
| Receiver sensitivity | 270M: -70dBm@10% PER; 130M: -70dBm@10% PER; 108M: -70dBm@10% PER; 54M: -73dBm@10% PER; 11M: -85dBm@8% PER; 6M: -88dBm@10% PER; 1M: -90dBm@8% |
| Antenna gain level (max) | 2.5 dBi |
| Ethernet LAN (RJ-45) ports | 4 |
| Power consumption (typical) | 6 W |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
Step-by-step guide on how to physically connect the router to power and network.
Guides users on configuring their computer's network settings for internet connection.
Instructions on launching the router's web interface for configuration.
Guides users through a step-by-step wizard for initial router setup.
Configuration for PPPoE internet connection type, including account and password.
Configuration for Static IP internet connection type, requiring specific IP details.
General wireless network settings like SSID, network mode, and channel.
Configuration options for securing the wireless network (WEP, WPA, etc.).
Configuration of the Dynamic Host Configuration Protocol (DHCP) server.
Configures specific ports to forward incoming traffic to internal servers.
Configures a range of ports to forward incoming traffic to internal servers.
Manages and limits network speed for devices or services.
Instructions for updating the router's firmware to the latest version.
Allows changing the router's administrative login username and password.
To Next Page
