Wireless-N Broadband Router
being transferred over
wireless network. If you
don’t know what it is / not
sure if you need it, it’s safe
to set this option to
‘Enable’, however, default
value is enabling.
APSD Capable: It is used
for auto power-saved
service. The default is
disabled.
Wireless Access Control
To secure your wireless
LAN, the wireless access
control is actually based on
the MAC address
management.
MAC Address Filter:
you want to access the
Router from any external IP
Address, please select the
“Disable”.
MAC Address:To specify
47
To Next Page
Loading...
