Tenda W330R User Manual

Wireless-N Broadband Router
Chapter 5: Advanced Settings
This section is to conduct the advanced configurations for the
Router, including LAN Settings, WAN settings, MAC Address
Clone and DNS Settings.
LAN Settings
MAC Address:The
Router’s physical MAC
address as seen on your
local network, which is
unchangeable.
IP Address:The Router’s
LAN IP address (not your
PC’s IP address). Once
you modify the IP
address, you need to
remember it for the
Web-based Utility login
next time. 192.168.0.1 is
the default value.
Subnet Mask: It’s shown
the Router’s subnet mask
for measurement of the
network size. 255.255.
255.0 is the default value.
16

Tenda W330R Specifications

General

Bandwidth	2.4 GHz
Input voltage	110 - 240 V
xDSL connection	No
Power requirements	AC 9 V, 1.2 A
Networking features	Ethernet, Fast Ethernet, Gigabit Ethernet, WLAN
Ethernet LAN	Yes
Receiver sensitivity	270M: -70dBm@10% PER; 130M: -70dBm@10% PER; 108M: -70dBm@10% PER; 54M: -73dBm@10% PER; 11M: -85dBm@8% PER; 6M: -88dBm@10% PER; 1M: -90dBm@8%
Antenna gain level (max)	2.5 dBi
Ethernet LAN (RJ-45) ports	4
Power consumption (typical)	6 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %