Tenda W330R User Manual

Wireless-N Broadband Router
LEDS:
Note: The device's ports are 10/100/1000Mbps. When the
speed is at 1000Mbps, the LED indicators will be green; when
at 10/100Mbps, the LED indicators will be red.
LED
Indicator
Status Description
POWER
Always
ON
The POWER indicator is Always ON
when it is powered on and works
properly.
SYS Blinking
The SYS is blinking regularly when
the system works normally.
Always
ON
Indicates the correct connection of
the WAN ports.
WAN
Blinking
Indicates the Router is
transmitting/receiving data packets.
WLAN Blinking Indicates the wireless signal is OK.
Always
ON
Indicates the correct connection of
the LAN ports.
LAN(1/2/
3/4)
Blinking
Indicates the Router is
transmitting/receiving data packets.
WPS Blinking
Indicates the Router is negotiating
with WPS clients in WPS Mode
(PBC).
5

Tenda W330R Specifications

General

Bandwidth	2.4 GHz
Input voltage	110 - 240 V
xDSL connection	No
Power requirements	AC 9 V, 1.2 A
Networking features	Ethernet, Fast Ethernet, Gigabit Ethernet, WLAN
Ethernet LAN	Yes
Receiver sensitivity	270M: -70dBm@10% PER; 130M: -70dBm@10% PER; 108M: -70dBm@10% PER; 54M: -73dBm@10% PER; 11M: -85dBm@8% PER; 6M: -88dBm@10% PER; 1M: -90dBm@8%
Antenna gain level (max)	2.5 dBi
Ethernet LAN (RJ-45) ports	4
Power consumption (typical)	6 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %