Need help?Do you have a question about the Tenda Wireless Network Adapter and is the answer not in the manual?
General| Interface | USB 2.0 |
|---|---|
| Frequency Band | 2.4GHz |
| Data Rate | Up to 150Mbps |
| Wireless Standards | IEEE 802.11n, IEEE 802.11g, IEEE 802.11b |
| Security | WEP, WPA, WPA2 |
| Operating System Compatibility | Windows XP/7/8/10 |
Provides important preparatory steps before installing the adapter.
Guides users on how to disable other network adapters.
Covers the physical installation steps for the adapter.
Step-by-step guide for installing the USB adapter.
Instructions for installing the PCI network adapter.
Guides connecting to a wireless network using Windows XP.
Guides connecting to a wireless network using Windows Vista.
Guides connecting to a wireless network using Windows 7.
Explains how to use the adapter in client mode.
Explains how to scan and view available wireless networks.
Displays detailed connection status and network parameters.
Covers creating, saving, and managing network profiles.
Settings for wireless mode and country region code.
Explains how to configure the adapter to act as an Access Point.
Settings for the Access Point's basic parameters (SSID, mode, channel).
Advanced settings for AP mode, like TX power and client isolation.
Manages MAC addresses to permit or deny network access.
Shows connected clients' details on the AP.
Specific instructions for AP mode in Windows 7.
How to use the adapter as an enrollee in PIN mode.
To Next Page