Tenda Wireless Network Adapter - AP Mode in Windows 7

Tenda Wireless Network Adapter User Guide
4.2.5 AP Mode under Windows 7
1. Under Windows 7, wireless adapters are allowed to work in
both STA and AP modes. Here, the wireless adapter acts not
only as a client, but also an AP to send wireless signal, which
equals to an amplifier. Right click the UI icon on the lower right
corner of the computer desktop and select “Switch to STA+AP
Mode”.
2. You can change the SSID on the Config AP screen and control
the number of the connected clients by modifying the max
number of peers. AP mode has only one encryption method
which is WPA2-AES by default and cannot be modified.
-49-