Tenda Wireless Network Adapter - Chapter 3 Windows Built-in Wireless Configuration; Connect in Windows XP

Tenda Wireless Network Adapter User Guide
Chapter 3 How to use the Windows
Built-in Wireless Configuration
This chapter explains to users who don’t install Tenda
configuration program how to use Windows Built-in Wireless
Configuration to connect to the wireless network .
Use of the Windows Built-in Wireless Configuration requires
enabling Wireless Zero Configuration service(the default is
enabled).
3.1 Wireless Network Connection under Windows
XP
1. Right click “My Network Places” on the desktop and select
“Properties”.
2. Open the network connection.Right click “Wireless Network
Connection” and select “View Available Wireless Networks” as
shown below.
-13-