Tenda Wireless Network Adapter - Associate List

Tenda Wireless Network Adapter User Guide
: to delete an existing MAC address in the list.
: to delete all clients’ wireless MAC addresses in the list.
Add the MAC address of the client’s wireless network adapter to
the list and select “All Allow” in the access policy drop-down list,
computers whose wireless MAC addresses are not included in
the list will be rejected by default. Select “All reject”, and only
the host computers whose wireless MAC addresses are included
in the list can not access the AP wireless network.
4.2.4 Associate List
When there’s client connected to this AP and has successfully
obtained the IP address ,then the client’s MAC address, AID and
Status can be seen on the list.
-48-