Tenda Wireless Network Adapter User Guide
-61-
A3: Microsoft ICS service can only combine one group of WAN
and LAN. This message indicates ICS may have been
enabled by other network adapters.
1.Please manually cancel or restart and cancel ICS, then
re-switch to AP mode.
2. This dialogue box appears because virtual wi-fi miniport
adapter can only be used by one wireless network adapter at a
time. Please disable any other non-Tenda wireless network
adapters and re-switch to AP mode.
Q4: Under Windows 7,when I switch from station mode to AP
mode ,the screen flashes“Disabling ICS， please
wait……”and immediately return to station screen.
A4: This is because you have disabled “Microsoft Virtual WiFi
Miniport Adapter”,please re-enable it and then switch
to AP mode.
Q5:Client cannot obtain IP when connected to soft AP of the
wireless network adapter.
A5:Manually set an IP address at the same net segment as that
of the AP and the gateway and DNS at the IP address
of AP.Thus, communication can be achieved.
Q6: The SSID is not fully displayed on the wireless network list,
what should I do?
To Next Page
Loading...