Tenma 72-13430 - Open Box Inspection

www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
TM
TM
Page <2>
V1.004/03/19
1. Overview
The new generation 72-13400 series products redene the performance standards for entry-level digital multimeter. The
innovative industrial design ensures the products have 2 meters impact resistance. The new LCD display layout provides a
clear display for better user experience. The 72-13400 series ensure safe operation in CAT II 250 V environment.
The special features of each model are as follows:
72-13430: 2mF capacitance test function
72-13435: Temperature test
72-13440: NCV test
2. Open Box Inspection
Open the package box and take out the device. Please check whether the following items are decient or damaged and contact
your supplier immediately if they are.
User Manual 1 Pcs
Test Leads 1 Pair
Protective case 1 Pcs
K-type thermocouple 1 Pcs (72-13430 only)
Warning:
Please carefully read “Safe Operation Rule” before using the device.
3. Safe Operation Rule
1) Safety certication
This device strictly follows the CE standards: EN 61010-1: 2010, EN61010-2-030: 2010, EN 61326: 2013, as well as
CAT II: 250V, RoHS, pollution grade ll, and double insulation standards.
2) Safety instructions and precautions
a. Do not use the device if the device or test leads appear damaged or if you suspect that the device is not operating property.
Pay particular attention to the insulation layers.
b. If the test leads are damaged, it must be replaced with one of the same type or the same electrical specication.
c. When measuring, do not touch exposed wires, connectors, unused inputs, or the circuit being measured.
d. When measuring the voltage higher than 60V DC or 30V ACrms, keep your ngers behind the nger guard on the test lead
in order to prevent electric shock.
e. If the range of the voltage to be measured is unknown, the maximum range should be selected and then gradually decreased.
f. Never input voltage and current exceeding the value listed on the device.
g. Before switching ranges, make sure to disconnect the test leads with the circuit to be tested. It is strictly prohibited to switch
the ranges during the measurement.
h. Do not use or store the device in high temperature, high humidity, ammable, explosive or strong magnetic eld environments.
i. Do not change the internal circuit of the device in order to avoid the damage to the device and users.
j. To avoid false reading, replace the battery when the battery indicator appears.
k. Use dry cloth to clean the case, do not use detergent containing solvents