Need help?Do you have a question about the Tenma 72-3540 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| DC Voltage Range | 200mV to 1000V |
| DC Current Range | 200µA to 10A |
| AC Current Range | 200µA to 10A |
| Resistance Range | 200Ω to 20MΩ |
| Display | 3.5 Digit LCD |
| Battery | 9V |
| Diode Test | Yes |
| Continuity Test | Yes |
| Capacitance Range | 2nF to 20µF |
| Frequency Range | 20kHz |
| AC Voltage Range | 200V to 750V |
Essential safety guidelines for using the multimeter to prevent injury and damage.
Lists all the items that come with the datalogging multimeter package.
Identifies key physical parts and explains the symbols on the multimeter's LCD screen.
Explains the purpose and operation of each button on the multimeter.
Details the function of each input terminal for various measurements.
Describes the functions assigned to each position of the rotary selector switch.
Provides overall technical specifications like voltage limits, fuse protection, and operating conditions.
Details the accuracy tolerance for AC voltage measurements across various ranges and frequencies.
Details the accuracy tolerance for DC voltage measurements across various ranges.
Details the accuracy tolerance for combined AC and DC voltage measurements.
Details accuracy for AC, DC, and AC+DC current measurements across ranges.
Details accuracy for resistance and capacitance measurements.
Details accuracy for conductance, temperature, frequency, and duty cycle measurements.
Details accuracy/remarks for pulse width, continuity, and diode tests.
Instructions on how to turn the multimeter on, off, and manage power.
Managing battery indicators, display backlight, and power-saving modes.
Guides on setting up keypad tone, alarm, communication, and date/time.
Accessing language, memory format, reset options, and device information.
Step-by-step guides and warnings for measuring AC and DC voltages.
Procedure and warnings for measuring AC and DC current.
Steps and warnings for performing resistance measurements.
Procedures and warnings for conductance, temperature, frequency, and duty cycle.
Procedures and warnings for continuity, diode, and capacitance tests.
Procedures and warnings for pulse width, diode, and frequency/duty cycle measurements.
Procedures and warnings for temperature and Low Pass Filter measurements.
Procedures for measuring dBV, dBm, and using Max/Min value tracking.
Using relative values, peak detection, and compare mode for advanced measurements.
Modes for saving, viewing, and deleting recorded measurement data.
Managing recorded data, viewing trend charts, and interpreting their information.
Connecting the multimeter for data transfer via USB or Bluetooth.
Procedures for general maintenance, testing, and replacing multimeter fuses.
Instructions on how to charge the multimeter's internal battery.
To Next Page
