Tenma 72-3540 - Data Recording and Management; Recording Measurement Data

24
measurement of compare mode. Press the function button EXIT to exit the
measurement of compare mode.
RECORDING MEASUREMENT DATA
• Press the function button SAVE to enter the modes of single recording, continuous
recording and inquire recording. Press the cursor buttons to select the following
modes:
Save
• Press the function button SAVE to record the current measuring data for once up
to 20,000 pieces.
View Save
• Press the function button VIEW to view one-time recorded data.
• Press or hold the function button PREV to view the previous recorded data.
• Press or hold the function button NEXT to view the the next recorded data.
• Press the function button DELETE to delete the current recorded data.
• Press the function button RETURN to return to the last menu.
• In addition to displaying the recorded data, the location and total number of current
recorded data are displayed in the lower left corner.
• The date and time of the current data recording are displayed in the lower right
corner.
Delete All Save
• Press the function button DELETE to delete all one-time recorded data.
• Press the function button YES to conrm.
• To cancel the operation, press the function button NO.
Record
• Press the function button ENTER to enter the continuous recording mode with
maximum recording pieces up to 10,000.
• Press ▲ or ▼ and move the cursor to select the three settings as follows:
- Edit Name
Press the function button EDIT to enter the continuous recording items.
• Press either ◄ or ► to move the cursor and select the edit locations.
• Press the F1 button to switch the input mode to “uppercase” mode, then press ▲
or ▼ to input uppercase letter.
• Press the F2 button to switch to the input mode to “lowercase” mode, then press
▲ or ▼ to input lowercase letter.
• Press F3 to switch the input mode to “digital” mode and press the ▲ or ▼ buttons
to enter numbers or symbols.
• Press F4 to save and exit edit mode.
- Set Interval
• Press the function button EDIT to set the interval time of continuous recording.
• Press or hold the ◄ or ► buttons to move the cursors to select edit locations.
• Press or hold the ▲ or ▼ buttons to enter different numbers.
• Note: the interval time can be set from 1sec ~ 60 mins.