Need help?Do you have a question about the Tenma 72-8495 and is the answer not in the manual?
General| Type | Digital |
|---|---|
| Max DC Voltage | 1000V |
| Max AC Voltage | 750V |
| Max DC Current | 10A |
| Max AC Current | 10A |
| Continuity | Yes |
| Diode Test | Yes |
| Continuity Buzzer | Yes |
| Battery | 9V |
| Display | LCD |
| Resistance Measurement | 200Ω to 20MΩ |
| Capacitance Measurement | 20nF to 200μF |
| Frequency Measurement | 10MHz |
Covers compliance, pre-use checks, safe practices, and measurement precautions.
Details battery handling, replacement, and meter power-off procedures.
Summarizes the tester's primary functions and capabilities.
Identifies and describes the main parts and connectors of the device.
Procedure for measuring AC and DC voltages with the multimeter.
Procedure for measuring AC and DC currents with the multimeter.
Procedure for measuring resistance using the multimeter.
Procedures for performing continuity checks and diode tests.
Explanation of special functions like Max Hold, Data Hold, and Auto Power Off.
Instructions for testing standard Ethernet (Base-T) cables.
Instructions for testing RJ11 modular telephone cables.
Instructions for testing coaxial cables using BNC adapters.
Procedure for testing cables using the remote terminator unit.
Lists the technical specifications and operating ranges of the device.
Guide on how to replace the batteries in the multimeter.
Instructions for safely replacing the internal fuses.
To Next Page
