Need help?Do you have a question about the Tenma 72-2930 and is the answer not in the manual?
General| Model | Tenma 72-2930 |
|---|---|
| Output Current | 0 to 3A |
| Power Rating | 90W |
| Line Regulation | ≤0.01% + 3mV |
| Load Regulation | ≤0.01% + 3mV |
| Ripple & Noise | ≤1mVrms |
| Voltage Display Resolution | 10mV |
| Current Display Resolution | 1mA |
| Cooling | Fan |
| Frequency | 50/60Hz |
| Operating Temperature | 0 to 40°C |
| Output Voltage | 0 to 30V |
| Protections | Overload |
| Storage Temperature | -20°C to 70°C |
Explains the voltage and current display values shown on the unit.
How to turn the power supply output on and off using the dedicated key.
Steps for setting voltage and current, including coarse/fine adjustment.
Process for storing and retrieving up to four internal panel setups.
Defines the structure and format for remote commands.
To Next Page
