Need help?Do you have a question about the Tenma 72-2630 and is the answer not in the manual?
General| Power Rating | 90 W |
|---|---|
| Cooling | Fan |
| Output Voltage | 0-30V |
| Ripple and Noise | 1 mVrms |
| Load Regulation | < 0.01% + 3mV |
| Line Regulation | < 0.01% + 3mV |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -20 to 70 °C |
Follow basic safety precautions to reduce risks of fire, electric shock, and injury.
Highlights include low noise cooling, over-temperature protection, digital display, and software calibration.
Details on using the power button, channel select buttons, output button, and adjustment controls.
Step-by-step guide to setting voltage and current using rotary controls and ON/OFF button.
Instructions for configuring the power supply in series or parallel modes using CH1 button.
Describes how to save current settings to memory and recall them later using M1-M5 buttons.
Procedure to set and enable Overcurrent Protection (OCP) and Overvoltage Protection (OVP).
How to lock panel controls and enable/disable the audible sounder.
Details on COM port setup, functionality checks, and command syntax for remote operation.
Guidance on cleaning the power supply using a damp cloth and mild detergent.
Instructions for replacing the fuse, including fuse types and safety precautions.
Detailed specifications for voltage range, current range, load/line regulation, accuracy, and ripple.
To Next Page
